Netgear N300 extender is tiny and a portable gadget that provides a number of attractive features. Basically, it comes with the latest technology. It assists the user to get a strong WiFi signal even in dead-spot areas. Consider the lower steps to do the login and setup process of the Wavlink N300 extender device. 

Features Of Netgear N300 Extender 

• The installation process of the Wavlink extender is so easy. 
• Netgear N300 extender eliminates all dead spot areas. 
• You can do the installation process independently.

Crucial Things For Netgear N300 Extender Login And Configuration 

• With an active internet connection, there is the need for a host router. 
• Need of an IP and web address with login credentials. 
• Any WiFi containing gadgets and access to using the navigation. 
• The unoccupied wall socket is in working condition.

How To Login Into Netgear N300 Extender 

• First, connect your Wi-Fi-containing gadget to the Netgear extender network. 
• Now, fill in the web address. 
• Next, the login page will open up on your display. 
• Fill in all the credentials that are shown on the login display. 
• As a result, now you will successfully login into the Netgear N300 extender. 

How To Setup Netgear N300 Extender 

Setup N300 Netgear Extender- By A Web Browser

• First, open chrome on your mobile phone. 
• Now, insert the mywifiext.net setup portal in the URL field. 
• Next, select the model number from the setup page. 
• Further, you can see the setup instructions on your display. 
• In the end, follow all those instructions step by step. 

Configure N300 Netgear Extender- By WPS button 

• Initially, fix your Netgear N300 extender device in an electrical socket and closer to the host router. 
• Now, in the front panel, press the extender WPS button. 
• Further in two minutes press the existing router WPS button. 
• Next, a solid green LED starts flashing on both the extender and router gadget.
• As a result, the configuration process of the Netgear N300 extender is now done. 

With the help of the above two methods, you will successfully do your Netgear N300 setup process. In case, after the setup process you are facing any type of issue in your extender device then observe the lower solution tips to fix them. 

• See all cable connections that link to the Netgear N300 Extender. 
• Check the gap between the N300 Netgear extender and the host router. 
• Does not locate your Netgear N300 extender near metal appliances. 

Upgrade Netgear N300 Extender Firmware 

• First, disable the connection between the gadget and the network. 
• Now, attach a PC or laptop to the extender network to upgrade the firmware of the web browser. 
• Next, visit the Netgear extender web-based setup portal. 
• On that page, tap on see the updates option on that similar page. 
• If there is any availability of upgrade firmware, then download it and save the file for further use. 
• After that, on that page select the option of Firmware upgrade. 
• Now, upload the file, which you downloaded earlier on your PC and laptop. 
• Hence, the upgradation of the Netgear N300 extender firmware process is now completely done. 

Reset Netgear N300 Extender 

The reset method is the last method to fix the issue of the Netgear N300 device. Read the below steps to do this method process. 

• First, take a hairpin or a paperclip. 
• Now, insert that paperclip in the reset hole button. 
• The reset button is located on the backside of an extender. 
• Further, push the reset hole button for 8 to 10 seconds. 
• After that, all the LEDs of the Netgear N300 extender device will turn off. 
• Therefore, it means your device is now completely reset. 

Note: After doing the reset process you will need to do the setup process again. 

Tip: If you have any other model such as the Netgear AC750 extender and you are facing an issue with them then you can reset your Netgear AC750 device. After the reset process, you will need to do the setup process of the Netgear AC750 device. If you don’t know how to do this then go to the Netgear AC750 setup page and follow all the steps one by one. 

After reading the full theory of this page, now you will be able to do the login and configuration process. In case, above trying solution tips if your extender issue is not resolved, then you will need to contact our technical team experts.