Why My Netgear Extender Not Connecting to Router?

Is your Netgear range extender not connecting to your router? Need not to worry! You have landed on the right post. This piece of writing gives you information on various fixes that will help you cope up with mynetgear not connecting to the internet issue in a fly. Let’s get the ball rolling!

Why Mynetgear Won’t Connect to Router?

If you have purchased a brand new Netgear extender to extend the range of your existing WiFi network, then we must say that you have made an excellent decision. However, sometimes, users face technical glitches while connecting their range extenders to WiFi routers. If you are also experiencing the same issue, then walk through the hacks listed below and get rid of mynetgear extender not connecting to router issue. Keep scrolling down!

Reasons

There could be a number of reasons that might be preventing you from connecting your Netgear extender to router. Some of the reasons are given-below:

• Improper configuration
• Loose wired connections
• Number of devices are connected to extender’s WiFi
• Wrong placement of Netgear extender
• Issues from your service provider’s end
• Netgear lights blinking in red or amber color
• Extender not getting enough power supply

Fix

Now, we are going to provide various fixes to get rid of the issue. Let’s get started!

1. Improper Connectivity

On the off chance if the Ethernet cable you have used to connect your extender and router is not working, you won’t be able to get the most out of your devices. Therefore, to fix the issue, replace the Ethernet cable right away. Else, connect your devices using a wireless source.

After applying this tip, access the Netgear smart connect feature to check whether your extender is connected to the router or not.

2. Bad Extender Placement

Placing your Netgear device at its ideal location also matters a lot when it comes to connecting your extender to your home router. While doing Netgear extender setup, make sure that your devices are placed within reach of each other and away from public hotspots.

It is always better to place your Netgear extender away from metal doors and corners. Also, avoid placing it inside a cabinet.

3. Technical Issue

Mynetgear extender not connecting to the router issue can persist if there is a technical issue with your device. To get the issue fixed, power cycle your Netgear extender. The process can be done easily by implementing a few steps listed below:

• Unplug your Netgear extender.
• Then, disconnect it from your main router.
• Wait for a few minutes.
• Plug in back your Netgear extender.
• Let the Netgear lights start blinking.

After power cycling your Netgear device, see whether you can connect your extender to your router. No? Fret not! Seems that there is some issue with the Netgear extender configuration. In such a case, check the step below.

4. Improper Configuration

To fix mynetgear won’t connect to the router issue, ensure that your extender is configured properly. To execute the process, do the following:

• Connect your Netgear extender to router.
• Provide your devices a continuous power supply.
• Open a PC or laptop.
• Enter mywifiext.net in the address bar. If the web address, mywifiext.net, is not working for you, use 192.168.1.250 IP for logging in to your Netgear extender. To prevent login issues, we advise – avoid using the browser’s search bar for entering the extender’s default web or the IP address.
• Press the Enter key.
• Netgear Genie setup wizard will appear.
• Follow the on-screen instructions.

Once you’re done, try connecting your Netgear extender to the router. This time, you will surely get success with the process of connecting mynetgear to the router.

Wrapping Up

With the use of fixes listed in this post, you will be able to get rid of the Netgear extender not connecting to router issue. In the event that the problem continues to spin your head, consider dropping your queries into the comments section.