Maroochydore Locksmith: Know Some Technical Terms

The concept involving locksmithing and lockpicking is considered to be a unique one. Researching on them will give you a better idea on locks and its opening techniques. There are a few technical terms that are used for both something that you need to be aware of. 

Some  related technical terms

Locksmithing

It is considered to be a scientific method used to maintain, break or make locks as well as lock systems. It is also an art to manipulate locks. It also includes security systems. 

Locksmith

It is the professional who has the knowledge and expertise to manufacture, open and maintain security systems and locks. You may trust in Maroochydore Locksmith for all your lock and key related needs. 

Tension Wrench

It is also referred to as the torque, a tool essential to pick locks. The tension or torque is ‘L’ shaped. It is used generally to exercise torsion to the lock’s inner cylinder. It can hold intact previously picked pins, in their proper place. The other pins get shifted by the locksmith like the inner cylinder. 

Tabular lock pick

This tool is used to open up the tubular pin tumbler type lock. Such locks are available in different sizes like 8 and 6 pin locks. They are quite similar in function and design. It is to be inserted simply into the lock, turning it clockwise by applying medium tension level. 

Modern tabular locks

A decoder complements the lock, allowing the Automotive locksmith sunshine coast to understand the depths where the pins broke the shear plane. Using this technique helps save hassle and cost to replace the lock. 

Slim Jim

It is created from a thin metal strip, measuring about 2 to 4 cm in width and 60cm in length. It is also referred to as ‘lockout tool’ and is used to open car doors and locks. It acts directly upon the interconnecting rods and levers operating the door. 

Key relevance

It is a term used to discuss or measure how to create identical key impression on wax. It helps create a spare key that will act as a replacement if the original one gets lost or misplaced. 

Key code

Locksmiths can be found to use alphanumeric character series to develop a key. They are mainly of two types, namely, bitting codes and blind codes. High-end security systems use them extensively these days. 

Rekey

This term is rather used to denote the chances of altering or changing the lock to suit diverse key types instead of the original one. The method or concept is helpful if the owner suspects the existing lock being misused to make unauthorized entries. It is expensive. 

Master key system and Maison

Master key system is much different from that of the Maison key system. The former type uses individual keys for accessing individual locks. On the other hand, Maison system operates locks with any type of key related to the system.

Shear line

This term is used to refer to cylinder locks, where inner cylinder ends and external cylinder starts.  Being a critical system, it helps secure the lock as well as helps in the locksmithing process without damaging the lock.