How To Connect Wavlink Extender To Router?

Are you aware about the Wavlink extender setup? If ‘No’ then don’t fear in this article you will know the setup of your wavlink extender. 

Let’s Start,

Note: Before the setup first you have to need basic requirement 

Essential Requirements for Wavlink WiFi Extender Setup

• First, an essential requirement is you have both an extender and a router.
• Now, enter your SSID and password in the login portal of the Wavlink WiFi extender. 

Tip: If you don’t know the username and password, you can check the box of extender or below the extender.

• Launch a web browser on your computer or on a mobile phone from one of them.

Note: Prior to the setup first you have to go to the login portal of an extender.

How Can I Login In to My Wavlink WiFi Extender

• Earliest, you have to connect your wavlink WiFi extender with a mobile or computer.
• Now, connect your wavlink extender to the WiFi with the help of a mobile phone/PC/laptop/computer.
• Then, open a list of WiFi on your mobile phone and find the Wavlink_EXT network and connect it with your mobile phone to an extender WiFi network.
• After this, launch a web browser on your gadget and enter wifi.wavlink.com in the address box of a web browser.
• After all this, a login page will appear on your display.
• Now, enter all the required credentials which are shown on them.
• As long as, you can now easily change the settings of a Wavlink Extender. Such as WiFi channels, Frequency bands, Speeds of the internet, etc.

How To Join Wavlink Extender To Router?

You can easily join your extender to the router, with the help of these two methods, 

1. By WPS
2. By Ethernet Cable

Bond Extender To Router Via WPS

• First, power on your extender and place the plug of an extender in the power socket.
• Now, wait for a few minutes to turn on the LED lights of an extender to turn solid blue.
• Be aware that both the router and extender must be located in the same room.
• Further, press the WPS button of an extender, or just within 2 minutes press the WPS button of the router. 
• After that, take out the plug of an extender from the power socket and place your WiFi extender in a new location where you want to establish it. Make sure that both the router and extender are not far away from each other. Just place both devices only 10 to 15 feet away from each other.

If you fail to connect your extender to the router via WPS then don’t worry there is another method try that one.

Join Extender To Router Via Ethernet Cable

• First of all, you have to connect an ethernet cable to the ethernet port of an extender.
• Now, connect another end of the ethernet cable to the ethernet port of the router.
• Before trying this make sure that your router must be connected to the computer.
• Now, put out the plug of an extender from the power socket.
• Wait at least for 2-3 minutes to become stronger and solid blue LED light.
• As a result your extender successfully bonds to the router.

Tip: If you are facing any type of trouble during wavlink extender setup.

Reasons Why People Face This Type Of Issue

• The internet connection does not work properly as it should.
• Both extender and the router are not placed in the same room.
• Extender fails to get a signal from the router.
• Plug of a wavlink WiFi extender does not switch ideally.
• Orange LED light does not blink on the extender.

A few Tips To Solve This Issue

• See all the cable connections.
• Download the latest or updated version of the software.
• Check the range between the router and the extender.
• You also check the location of your extender.
• Turn off and on your wavlink WiFi extender.
• Check the status of both the router and modem.
• As a result, after trying this method if you are still facing trouble then this the last method but not least you can try to reset your wavlink WiFi extender.

Conclusion

After reading this article, we hope you are able to understand how to connect an extender to a router in a very quick or an easiest way. Do also check here the process of ap setup.

Stay aware of such more updates.